'%' and '%on'

 You can access the last output using the variable '%'. You can access the output of previous commands using variables '%on' where n is the number of output.


'%' 변수를 사용하여 마지막 출력에 액세스할 수 있습니다. 

'%on' 변수를 사용하여 이전 명령의 출력에 액세스할 수 있으며, 여기서 n은 출력 번호입니다.


example




댓글

댓글 쓰기

이 블로그의 인기 게시물

Biaxial bending interaction diagrams

이미지
Biaxial bending interaction diagrams for reinforced concrete column design solution The steps to calculate biaxial flexural strength of a rectangular reinforced concrete column for a given nominal axial strength and moment ratio of biaxial bending moments are as follows: 1. assuming a value for the angle of the neutral axis (a) and the neutral axis depth (c) to calculate the strain values in each reinforcement layer 2. Calculate the forces values in the concrete (Cc) and reinforcement layers (Fst) 3. Calculate Pn, Mnx/Mny using the following equations the procedure above should be repeated until the calculated Pn, and Mnx / Mny are euqal to the given Pn, and Mnx/Mny. The following figure demonstrates the procedure explained above: 출처: Biaxial Bending Interaction Diagrams for Rectangular Reinforced Concrete Column Design (ACI 318-19) Structure Point https://skyground21.tistory.com/entry/Biaxial-bending-interaction-diagram
자세한 내용 보기